Often people think that installing a wood floor is too complicated. However, if you have a little more time and patience and concentrate on reading all the directions and take proper measurements, then most certainly you will be able to install the flooring of almost any type in no time.
Often taking up a flooring installation is compared with completing a jigsaw puzzle, but it will be easier than that. The key to successful wood flooring installation is to lay the very first tile at one corner of your room and then keep laying the rest of the pieces as you will work towards completing the whole puzzle.
Among the many other things, the following are the 8 facts that you must know about the characteristics of the wood floor and prefinished wood floor installation.
- Easy to find
You can find prefinished wood floors quite easily in the market as nowadays there are many suppliers of unfinished wood floors.
- Odorless
Since prefinished wood floors are meticulously made in the factories, so it is specifically made for shining and will not emit a kind of odour which you can find in most of the natural wooden materials.
- Thicker coating
Most of the factories will apply a thicker and consistent coating on the wooden material that they supply.
- No need to sand
Most wood needs sanding so that you can make it shiny and smooth. However, since most of the prefinished boards are sanded already and hence sanding after installation will not be necessary.
- Irreparable
During the process of installation, the most inexperienced installer may either scratch or dent the wood floor. When this will happen, you will have to replace it with some other wood board. You must think about the extra amount of costs that you may have to incur without taking the help of any experienced flooring installation contractors selected from FlooringDomain.
- Delicate procedure
As you know the process of installation of the wood floor is very delicate, it needs skills of an experienced installer. The material to be used must be heavy, delicate, and yet abrasive and various tools are to be used may not be so simple.
If it is done improperly then any mishap may lead to scratches, dents, or sometimes even severe damage.
- Impossibility of refinishing
In case of any scratch, the coating consistency can never be replaced by just refinishing it manually. The consistency that was brought about by the manufacturer can be very difficult to imitate.
- Easy to maintain
Since, it is usually covered by urethane and its surface is stronger, it is more durable and also easier to maintain. If it gets spilled with water or some other liquid, then you can simply wipe or mop it.
In case, it is soaked for some time, then just let it get air cooled for a while to get the wood dried out.
By using any kind of wooden floor, you can enhance the resale value of your home. Wood flooring is great for those families where members have got a tendency to get allergies.
